Batman Hueforge

→ Link to my collection of works ← Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 172.29x250mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm #000000 PETG GREG Black(черный) Transmission Distance: 1.4 #334039 PETG 3ds tech Grey dark(серый темный) Transmission Distance: 0.4 #93a3a4 PETG FDplast Light grey(светло серый) Transmission Distance: 0.8 #ffffff PETG Nit White(белый) Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black(черный) At layer #8 (0.72mm) swap to Grey dark(серый темный) At layer #10 (0.88mm) swap to Light grey(светло серый) At layer #14 (1.2mm) swap to White(белый) for the rest.