Batman Hueforge

→ Link to my collection of works ← Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 140.78x250mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm #0b110b PETG Creality Black(черный) Transmission Distance: 0.1 #4c5f71 PETG FDplast blue grey Transmission Distance: 3 #ffffff PETG Nit White(белый) Transmission Distance: 5 #fcf249 PETG 3ds tech Yellow(желтый) Transmission Distance: 7.1 #bc4f16 PETG 3ds tech Orange(оранжевый) Transmission Distance: 5.3 This print uses 5 unique filaments Swap Instructions: Start with Black(черный) At layer #8 (0.72mm) swap to blue grey At layer #12 (1.04mm) swap to White(белый) At layer #16 (1.36mm) swap to Yellow(желтый) At layer #21 (1.76mm) swap to Orange(оранжевый) for the rest. For only One AMS, need 1 pauses during the printing, Start with 4 colors as follows: Slot1: Black <span style="backgroun