Batman - Hueforge

Project: Batman - HueForgePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150.42x220mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #12 (1.04mm) swap to Gray At layer #18 (1.52mm) swap to Jade White for the rest.