Battery addon - Lynovation CTR2-MIDI & CTR2-Micro

Please checkout the post on my website for a bit of background on the case. Printed and constructed cases can be purchased from my shop as can any of the parts below.PartsYou will need the following:1x Printed case (see files below)1x Seeed Studio Lipo Rider Plus board1x LiPo 3.7V Lipo Battery (max size 29.5x11.3x47mm)I have used the EEMB 1400mAh 112945 in my build.VERY IMPORTANT: Check the polarity of the connector on your battery, against the connector on the board - I had to swap mine around.1x USB-C cable with bare ends (only power required)1x SS12F15 1P2T Miniature Vertical Side Switch (size 19.7x5.8x8mm)6x M2x4mm screws for mounting the switch and the board to the case2x 40mm lengths of cable (connecting the switch to the board)ConstructionThe last few pictures show the connections.The switch is connected to the board at pins EN/GNDThe USB-C lead is connected at pins 5V/GND