Thingiverse
Household
Go to Model
Baubles 2019 v2
569
Downloads
501
Likes
3
Makes
Set of few christmas tree balls
---
12.XII.2022
**Updated with V2 models**
Thicker walls, more clean, easier to print and with new models
There is no 'hole' versions in V2
---
Hole versions are for supports for the top. You can use a plug then (not print-tested)
Full versions may be printed without infill if you have a good printer and set it right. (like maybe 2-3 walls but much more top skin layers, or smaller model size).
If you want you can print two halves (of Full versions) and glue it together.
On normal size you will need to lower the model on Z axis for 30mm for top half, and then for the bottom part rotate model by 180dgr and set Z = -37mm
---
Check my Thingiverse collection for more Christmas decorations
Or Cookie cutters
---
12.XII.2022
**Updated with V2 models**
Thicker walls, more clean, easier to print and with new models
There is no 'hole' versions in V2
---
Hole versions are for supports for the top. You can use a plug then (not print-tested)
Full versions may be printed without infill if you have a good printer and set it right. (like maybe 2-3 walls but much more top skin layers, or smaller model size).
If you want you can print two halves (of Full versions) and glue it together.
On normal size you will need to lower the model on Z axis for 30mm for top half, and then for the bottom part rotate model by 180dgr and set Z = -37mm
---
Check my Thingiverse collection for more Christmas decorations
Or Cookie cutters
C47_3D also publishes on
66 additional models across 2 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
