Thingiverse

Baum Collapsible Bottle

by RiverFamily

11 Downloads

37 Likes

0 Makes

Video: https://www.youtube.com/watch?v=AIPcSTuXWGw

__Manual modifications of the gcode are required to make Baum watertight, so I suggest printing Baum.gcode instead of slicing the .stl

__Upload Baum.gcode on an SD card and insert it in the printer. Ignore warnings and launch the .gcode from the printer interface.__

__Baum.gcode is compatible with printers with 0.6mm nozzle and at least 130x130x210mm build volume.__

Lower speed down to 50% after the print starts on bowden printers.

__Baum.gcode prints in vase mode in 8h with 30g of Polypropylene (PP) filament.__

__Apply standard plastic adhesive tape (commonly made of PP) to the bed to ensure adhesion.__

Tested with Formfutura PP

How I sliced Baum.gcode: https://www.youtube.com/watch?v=qj2Xh6ys8mk

Settings (Cura):

from the start to the neck:

layer height: 0.2mm
line width: 0.6mm
wall line width: 0.59mm
wall line count: 1
bottom layers: 4
top/bottom pattern: zig zag
top/bottom line direc

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA, Polycarbonate

Min. bed size

210 mm (Large)

Est. print time

8 h

Post-processing

Gluing

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

RiverFamily also publishes on

14 additional models across 2 more platforms

Frequently Asked Questions

Which 3D printer is suitable for Baum Collapsible Bottle?

Any FDM printer should handle Baum Collapsible Bottle just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 210 mm is recommended.

Does Baum Collapsible Bottle need supports when printing?

No supports needed for Baum Collapsible Bottle — it's designed to print clean off the bed.

How long does it take to print Baum Collapsible Bottle?

According to the design notes, Baum Collapsible Bottle takes approximately 8 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Baum Collapsible Bottle available in?

Baum Collapsible Bottle is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Baum Collapsible Bottle free to download?

Yes, Baum Collapsible Bottle is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

5 Suggestions

Baum Collapsible Bottle

Similar Models

Add to Collection