Bayern Munchen Logo Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 237.29x210.55mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.5mm Filaments Used:PLA Kingroon Blue Transmission Distance: 0.9PLA Kingroon Red Transmission Distance: 4.2PLA Kingroon White Transmission Distance: 4.7This print uses 3 unique filaments Swap Instructions:Start with BlueAt layer #7 (0.64mm) swap to RedAt layer #12 (1.04mm) swap to BlueAt layer #13 (1.12mm) swap to White for the rest.