BC-250 Scooper

A solution he came up with for opening up the heat sink fins on the BC-250. This idea was inspired by the tools that are used for straightening AC radiator fins. Recommended Usage Instructions:Please be careful. The fins on the heat sink are thin and will cut you. He sliced my fingers a couple times in the process of straightening the heat sink on my BC-250.Hold the scooper like this:2. Slide the pointed end of the teeth into the heat sink from the side. Take your time getting the fins open on the end. Also, make any fins you wish to straighten pass through one of the gaps between 2 teeth (this means a maximum of 4 fins at a time). The straightening action is achieved by jamming the fins in between 2 adjacent teeth.3. Once you have the tool worked in about an inch from the end, you can start to use more force. The heat sink fins should be bottomed out in the gaps between the teeth. The gaps are round on the back so that the scoop can be used as a lever smoothly and without denting the