Thingiverse

BCN3D MOVEO Pixy2 Camera Adapter

by robertall

1 Downloads

0 Likes

0 Makes

*UNTESTED*

3D prints flat with no supports, no rafts, no brim etc.

It prints fine, without issue, using PLA.

Not actually managed to get pixy2 yet to see if it fits within bracket but measured based on online dimensions. Takes just over 2 hours to print at 20% infill and 50mm/s

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

2 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does BCN3D MOVEO Pixy2 Camera Adapter need supports when printing?

No supports needed for BCN3D MOVEO Pixy2 Camera Adapter — it's designed to print clean off the bed.

How long does it take to print BCN3D MOVEO Pixy2 Camera Adapter?

According to the design notes, BCN3D MOVEO Pixy2 Camera Adapter takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is BCN3D MOVEO Pixy2 Camera Adapter available in?

BCN3D MOVEO Pixy2 Camera Adapter is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is BCN3D MOVEO Pixy2 Camera Adapter free to download?

Yes, BCN3D MOVEO Pixy2 Camera Adapter is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

BCN3D MOVEO Pixy2 Camera Adapter

Add to Collection