MakerWorld
Hueforge & Lithophane
Model downloaden
Beacon in the Storm – Dramatic Lighthouse Hueforge
1
Downloads
3
Likes
2
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 144.24x250mm in size You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm #000000 PLA+ Deeplee Black Transmission Distance: 0.1#5b6579 PLA BambuLab Basic Blue Gray Transmission Distance: 3#abaeb0 PLA Deeplee Grey Transmission Distance: 2.2#e3e1c1 PLA Deeplee beige Transmission Distance: 3.1This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Blue GrayAt layer #14 (1.2mm) swap to GreyAt layer #19 (1.6mm) swap to beige for the rest. If you want to change the print size, only change the X and Y axis but do not change the Z axis.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
