Bee

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.08mm and the Actual Thickness is 2.07998mmFilaments Used:PLA ****** + Black Transmission Distance: 0.3PLA Sunlu META Grey Transmission Distance: 3.6PLA ****** Basic White Transmission Distance: 7This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to GreyAt layer #13 (1.12mm) swap to White for the rest.