Beefy Simple Hinge by Design8Studio - for using 2mm coat hanger wire as the hinge pin

by Doug Joseph (design8studio) · Tools

0 Downloads

4 Likes

0 Makes

Go to Model

Thicker, stronger & set for 45-degree printing to avoid layer line adhesion issue for both screw holes & hinge pin holes

Category

Tools

Source

Printables

Published

06.05.2025

Updated

06.05.2025

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions