MakerWorld

Office

Beer opener and Cap

by JirkaKral25 · Office

1.2k Downloads

351 Likes

804 Makes

The part is optimized for 0.2mm layer height and printable without support. the part is PLA and works well with it. other materials are of course also possible (ABS, PETG etc.) to get the necessary stability, it is recommended to print with 3-4 wall lines or 100% infill.

beer bottle diy frink gift glass keychain opener present tool useful

Category

Office

Source

MakerWorld

Published

02.03.2024

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports · 0.20mm layers

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, ABS, PETG

Min. bed size

50 mm (Small)

Layer height

0.2 mm

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Beer opener and Cap?

Any FDM printer should handle Beer opener and Cap just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Beer opener and Cap need supports when printing?

No supports needed for Beer opener and Cap — it's designed to print clean off the bed.

What file format is Beer opener and Cap available in?

Beer opener and Cap is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Beer opener and Cap free to download?

Yes, Beer opener and Cap is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Beer opener and Cap

Similar Models

Add to Collection