Thingiverse
Electronics
Go to Model
Bench Power Supply
66
Downloads
56
Likes
0
Makes
This is my version of poor man bench power supply. It is based on cheap XL4016, MP1584, DSN-VC288, Type-A Female USB To DIP 2.54mm PCB Connector boards from ebay & 18.5 V/6.5 power supply from HP laptop, model PPP017S.
Specification:
Input voltage: 7V - 40V
Output voltage: 1.25V - 35V
Output current: 0.3A - 10A
All parts are designed to print without support.
Hardware: M3 x 10mm long bolts, M3 nuts, M3 x 10mm long & M3 x 15mm long self tapping screws.
Specification:
Input voltage: 7V - 40V
Output voltage: 1.25V - 35V
Output current: 0.3A - 10A
All parts are designed to print without support.
Hardware: M3 x 10mm long bolts, M3 nuts, M3 x 10mm long & M3 x 15mm long self tapping screws.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
