Bender Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 146.55x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mmSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #14 (1.2mm) swap to Grey At layer #20 (1.68mm) swap to Jade White At layer #23 (1.92mm) swap to Yellow for the rest. Boost MeBoost are welcome