Bender model - 50cm – 3D printable model from MakerWorld

MakerWorld

Characters

Bender model - 50cm

by Pcanozo · Characters

291 Downloads

219 Likes

32 Makes

Go to Model

Model of bender from futurama. this is my first creation , so I'm open for advices. The profile on the model is the same i used to create the model, it does work for me, but you may need to put it on your way. I didn't glue all the parts in the pictures, so you can see the fitting between parts is quite good. i did the body as it is in the file, but the bottom isnt straight , so will get some scaring from the supports. But you can cut the body where you want, and lay it down in the flat side and glue it. I personally prefer the way I've done. I did spent around - 1.5kg to 1.7kg:grey - 1.2kgblack white brown - around 500g The whole project takes around 3 days to complete

bender futurama robot beer funny cigar bottle lifesize big multicolor movie series movies angry fun statue shelf prop miniature 50

Category

Characters

Source

MakerWorld

Published

08.06.2024

Updated

30.04.2026

What you need to print this: Advanced Medium confidence

Why?

supports needed · 2 colors · large print

Single piece Supports required 2 colors / AMS

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Colors

2 (AMS/MMU recommended)

Post-processing

Gluing

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Bender model - 50cm ?

Any FDM printer should handle Bender model - 50cm just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Bender model - 50cm need supports when printing?

Yes, Bender model - 50cm will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Bender model - 50cm available in?

Bender model - 50cm is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Bender model - 50cm free to download?

Yes, Bender model - 50cm is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL