Bentley Front End – 3D printable model from MakerWorld

MakerWorld

2D Art

Bentley Front End

by PAPA Emeritus IV · 2D Art

9 Downloads

4 Likes

1 Makes

Go to Model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 2.9 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #11 (1.04mm) swap to Blue Gray At layer #18 (1.6mm) swap to Ash Gray At layer #20 (1.76mm) swap to Jade White for the rest.

bentley front end car car art hue multi multi colo multi color multi color print multi color printing Luxury luxury

Category

2D Art

Source

MakerWorld

Published

04.01.2024

Updated

30.04.2026

What you need to print this: Beginner Low confidence

Why?

2 colors

Single piece 2 colors / AMS

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Colors

2 (AMS/MMU recommended)

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

PAPA Emeritus IV also publishes on

20 additional models across 1 more platforms

♥ 395 ↓ 1,355 ⚒ 20

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL