Bentobox 12V Cable Routing

Finally printed the BentoBox recirculating airfilter and made some changes to it and some nice cable management inside the P1S for 12V. I use the filter mainly when printing ABS/ASA to avoid VOCs and that nasty white deposit that accumulates over time on the interior. Another benefit is that I’ve found out from others - the temperature is more homogeneous and this avoids warping with ABS/ASA. I didn't like the way the cables hung under the fans. That's why I made a remix and integrated a cable duct into the fancase. The cable goes through one of the free fan holes into the cable routing connecting both fans together. The fanduct I also made compatible with the more available M3 inserts from ruthex M3 x 5.7mm. I drilled a hole in the interior of the P1S and inserted a rubber grommet for a nice looking cable management. On the backplate I used a DC socket for 12V and soldered a cable with a JST connector to it. The 2x server fans from Arctic S4028-15K have each 15K RPM/20cfm and