Thingiverse

Berserk Lithophane

by netshark

22 Downloads

26 Likes

0 Makes

https://www.youtube.com/watch?v=sKZQDGUYJsE

This was my first prototype of making a lithophane. I plan to make several custom prints for Christmas Presents and wanted to see what the different thicknesses would look like. If I have time down the line I may redo this one because the Guts image is a little darker than I would like, it needed to be printed thinner. And the eclipse ring at the top gets too thin and there are slight breaks in the print because of it. But overall I'm happy with the results and decided to share it. The globe is about 7 inches in diameter.

For the actual LED light board inserted within the globe, you could search aliexpress for "moon lamp led board". The specific ones I went with are here https://www.aliexpress.us/item/3256803521026493.html?spm=a2g0o.order_list.0.0.4fa1180298ic7L&gatewayAdapt=glo2usa&_randl_shipto=US.

Print the clip first and separate. Then I insert the led board while it is printing, for my printer it was about 13 hours into the

berserk globe guts light lithophane manga moon

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Est. print time

13 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Berserk Lithophane?

Any FDM printer should handle Berserk Lithophane just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print Berserk Lithophane?

According to the design notes, Berserk Lithophane takes approximately 13 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Berserk Lithophane available in?

Berserk Lithophane is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Berserk Lithophane free to download?

Yes, Berserk Lithophane is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Berserk Lithophane

Add to Collection