Beyblade compatible performance tips | Beyblade kompatible Performance Spitzen

Here is my design of a Beyblade compatible adapter plate, printable with as little support as possible. Any tips with a flat base can be mounted on it using an M3 screw and/or glue. The adapter is designed to work with 3-4 coils of a commercially available compression spring (inner diameter 9-10 mm, 1 mm spring wire, e.g. at Hornbach in Germany in size 11x67x1 for 1€) and without any further screwings. The spring holder is simply pressed into the housing with the spring plate and spring mounted. In my case, the friction holds everything together securely even with strong springs with 5 coils. If necessary, the spring holder and housing can be additionally connected with M2 screws and/or glue. Currently I have uploaded a spherical ("Kerberus"), a conical, a spiral ("Hexaspring") and a tip with three rings (in the picture filled with a heavy brass ball and visible as 50% print).
Print the parts in STL orientation with 0.2 mm layer height. The spring plate needs support from the print b