Thingiverse
Beyblade Handle
von PeterBrit
11
Downloads
12
Likes
0
Makes
I wanted a Beyblade handle but didn't see one available for the style I had. It is a two piece that clips into available features on the launcher. These parts have gone through a few iterations and work well but I may still make improvements.
I printed these out of ABS because I have too much of the stuff laying around and use it to prototype with. After a few more iterations I will start using PETG or PLA which may change dimensions.
How to assemble:
1. Hook handle into launcher first. Handle is installed opposite of side that rip cord is pulled out of.
2. Tuck one of the arms of the clip into the mating feature on the handle.
3. Use small awl or flat blade screw driver to hold circular lock out of the way while pushing other clip arm in. Don't pull up too far on circular lock or it may break off.
4. Once clip arms are in place push circular lock in flush with the rest of the clip and handle.
The original version has worked well for a while now without issues. I
I printed these out of ABS because I have too much of the stuff laying around and use it to prototype with. After a few more iterations I will start using PETG or PLA which may change dimensions.
How to assemble:
1. Hook handle into launcher first. Handle is installed opposite of side that rip cord is pulled out of.
2. Tuck one of the arms of the clip into the mating feature on the handle.
3. Use small awl or flat blade screw driver to hold circular lock out of the way while pushing other clip arm in. Don't pull up too far on circular lock or it may break off.
4. Once clip arms are in place push circular lock in flush with the rest of the clip and handle.
The original version has worked well for a while now without issues. I
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
