BGS 115 Box and Gridfinity

This is a small box for a driver I bought of Amazon with a terrible case and bit storage. The box holds the driver and 16 bits. The Box What you will need to assemble the box:2x M3x8mm Heatset-Inserts2x M3x12mm ISO4762 Hex Socketed Head Cap Screws22x Magnets 5x3mmI recommend some threadlock to retain the scews after you set the tension to get a nice and smooth action. PS: The text on the box is not in this version. If you want to add text look for the link to the onshape model down below! Gridfinity The size is 3x1 and the height is 3u with a lip for stacking.This version uses the standard 5x2mm magnets. You will need 30 of them.If you want to adjust the model you can do so via onshape.Use the variables to adjust the model and the FeatureScript in the folder for the Gridfinity. Here is the Link: https://cad.onshape.com/documents/38d26aea1a03d9c8ab921110/w/afd3d6655834efaacdc4670a/e/04d4982f4757b0c3eb64ece5 Enjoy!