Bicycle bottle cage standoff

This is a standoff for bicycle bottle cages. I needed it for my Vitus Mythique 2023 bike due to its peculiar cable routing. It is designed around my bike, but should be compatible with all bikes and standard bottle cage mounts. This standoff adds 7mm of height and should weight around 5-6 grams.PrintingThis part was designed to be printed at 0.28mm layer height. It doesn't need to be pretty, but it's nice to print it faster.Infill doesn't matter much, but make sure to have 6 perimeters with 0.4mm nozzle or 4 perimeters with 0.6mm nozzle.Both PLA and PETG filaments are fine. If printing with PLA, don't leave your bike with this standoff in high heat. Other rigid filaments should be good too.Small overextrusions on top and bottom layers will result in uneven surface. Once printed, sand these surfaces to prevent bottle cage from rocking. InstallationRegular bottle cage mounting bolts are M5 12. When you add 7mm more they won't be able to screw into your frame anymore. Make sure to use lon