MakerWorld
Office
Go to Model
Big Bestagon Coaster
7
Downloads
3
Likes
3
Makes
IMPORTANT!! IF USING .stl FILES INSTEAD OF .3mf check print settings below!I needed a coaster that could handle lots of condensation and was large enough for the cups I like to use but the ones already online weren't cutting it for me, so I made my own.This coaster comes in two parts, center/top and outer/bottom pieces, The center part relies on the slicer for its grid/holes, you can change the size of the holes by changing the infill %. Print settings: (Using 0.4mm nozzle)Center Part:Thick layer lines, I used 0.28mmWall Loops set to 1Top Shell Layers and Bottom Shell Layers set to 0Infill density set to 10% (or more/less to your own preference)Infill pattern set to Honeycomb (not to be confused with ‘3d honeycomb’) Outer Part:layer lines set to 0.2mm (decrease to 0.12 or for smoother finish)Infill density set to 100% (to prevent moisture from leaking through the bottom)
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
