Thingiverse
Big Lure Turner
door Revamped_Outdoors
122
Downloads
100
Likes
0
Makes
This is a large lure turner, I am using a disco ball motor for the motor but you could easily modify this design to use a rotisserie motor as well. All of these pieces were designed with fusion 360 and printed with simplify 3d on a heavily modified (for safety) Anet A8. I printed the design in PETG but I don't see why it wouldn't work with PLA. I used PETG to have a little bit more strength. I printed the couplers in 100% infill and all the other parts at 10% with 3 perimeters.
Things you will need for this project:
- A motor with a stand to match the height of the stand for the turner.
- 1 608 bearing
- 16" (350 cm) or smaller piece of EMT 1/2" conduit for the shaft of the turner.
- 1 2" codder pin if your motor allows.
- CA glue (super glue) of your choice.
- a 3d printer...kind of a given here...
I have made a video of this project if you are interested:
https://youtu.be/hNxEQzfX3-g
1. To assemble the printed parts glue the arms onto the couplers after they snap
Things you will need for this project:
- A motor with a stand to match the height of the stand for the turner.
- 1 608 bearing
- 16" (350 cm) or smaller piece of EMT 1/2" conduit for the shaft of the turner.
- 1 2" codder pin if your motor allows.
- CA glue (super glue) of your choice.
- a 3d printer...kind of a given here...
I have made a video of this project if you are interested:
https://youtu.be/hNxEQzfX3-g
1. To assemble the printed parts glue the arms onto the couplers after they snap
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
