BigTreeTech TFT70 7inch TouchScreen

Newly designed enclosure for the BTT TFT70 7inch touchscreen display. I have been using this enclosure for about 2 weeks now and it works great. Very solid and minimal movement whilst touching. That was my big issue with previous designs. So this is iteration number 3 and seems to be great. You will need a few M3 x 20 mm screws as well as a few M5 x 5 mm screws with your choice of T-nut style. Also you'll need a couple M5 x 8 mm screws with nuts to attach the enclosure to the mounting arm. So, 6 M5's and 4 M3's in total with 4 T-nuts and 2 standard hex nuts.

There is also room for the WiFi module to be installed on the screen. I have the WiFi module on both of mine and they fit great.

*edit* The reason for the added GRID on the inside of the rear cover is because there is so much area on this piece that it has a tendency to raise on the corners and also warp once removed from the bed. So I added some structural rigidity to this area to minimize the chances of that happening. Both