Thingiverse
Bike Cable Adaptor
door jkeveren
40
Downloads
28
Likes
1
Makes
WARNING:
This must be printed in orientation shown in rendered image or it will not be strong enough to take the cable tension.
This is a gear cable adaptor which allows the use of modern, handlebar mounted shifters on classic frames that only accept classic, frame mounted shifters.
As you can see by how dirty the frame is, it has lasted a long time with no issues.
This is for frames with a down tube diameter of 29mm and a classic shifter mount (The square bit attached to the frame) width of 12.5mm/(1/2").
This must be printed in orientation shown in rendered image or it will not be strong enough to take the cable tension.
This is a gear cable adaptor which allows the use of modern, handlebar mounted shifters on classic frames that only accept classic, frame mounted shifters.
As you can see by how dirty the frame is, it has lasted a long time with no issues.
This is for frames with a down tube diameter of 29mm and a classic shifter mount (The square bit attached to the frame) width of 12.5mm/(1/2").
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!