Bike lock holder

Here is a Design for a bike lock holder. The idea : You mount with nuts and screws one of the part on the U shaped bike lock. I made 3 sizes so you can choose the best diameter (16.6, 18.6 and 20.6mm). You mount the other parts on the saddle tube. To make sure it does not move, you have 2 more parts that you can lay on the saddle collar. Then you press the support on it. And finally you should have put a nut and a screw in the specific hole that will allow you to exert pressure. (Pro tips, do not screw too tight, and add a bit of gum/silicone/similar on the tip of the screw to avoid getting loose)Use the support by sliding it in and outYou will need material that you can't 3D print to build it3 classic M5 screws (1 M5 16-20mm and 2 that can be shorter)3 classic M5 nuts (usually 3mm thick, and 8mm large) To guide you while mounting I've put a sliced view of the modelI recommend using PETG as there is less creep and it is stronger. Bike locks can be heavy so don't hesitate to