BIQU B1 easy V6 mount

This part allows you to fit a regular non-volcano V6 hotend with a threaded heatsink to your B1 stock hotend easily, only three printed parts required, including new part cooling fan ducts. I've designed this for Trianglelabs threaded V6 heatsink, i cannot guarantee compatibility with other similar parts. I recommend buying the heatsink and a V6 hotend kit, links are included.

The nozzle stays in the same place as stock one in X and Y axis, unlike some other designs, so you won't lose build volume (except for few mm in Z axis). When using a BLTouch or a clone, you may need to print a spacer between the mount and the sensor, so it sits slightly lower, since the nozzle tip also sits a bit lower. Also you need to adjust your Z-offset, so your nozzle won't crash the bed.

There are two drawbacks in this design:
-The hotend fan has to be mounted outside of the hotend casing, and the wire has to be routed outside the casing all the way to the breakout board.
-If you use a locking cli