Bird - HueForge

Project: ptak2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 117.85x131.05mm in sizeYou may print at higher layer heights below the Min Depth of 1mmThe Max Depth is 2.5mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #16 (1.36mm) swap to Red At layer #19 (1.6mm) swap to Blue Gray At layer #21 (1.76mm) swap to White for the rest.