Bitelchus Hueforge 200x200

El Hueforge esta apoyado sobre un soporte muy practico y minimalista https://makerworld.com/en/models/653796#profileId-582811 The Hueforge is supported on a very practical and minimalist supporthttps://makerworld.com/en/models/653796#profileId-582811 Project: Bitelchús.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA smartfil black Transmission Distance: 0.4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with black At layer #11 (0.96mm) swap to Blue Gray At layer #16 (1.36mm) swap to Beige At layer #21 (1.76mm) swap to Jade White for the rest.