Black and Gray Cat 1

Project: Black and Gray Cat 1.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 124.93x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.64mmFilaments Used: PLA Bambu Basic Black Transmission Distance: 0.1 PLA BambuLab Basic Blue Gray Transmission Distance: 2.6 PLA Bambu Matte Nardo Gray Transmission Distance: 0.3 PLA+ Esun Bone White Transmission Distance: 4.9 PLA Bambu Basic Jade White Transmission Distance: 6.3This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #12 (0.6mm) swap to Blue Gray At layer #17 (0.8mm) swap to Nardo Gray At layer #19 (0.88mm) swap to Bone White At layer #27 (1.2mm) swap to Jade White for the rest.