Blackstone Griddle Knob Fix

Ever have a perfectly good knob on a Blackstone griddle, but the little center insert piece is broken? Apparently this is pretty common with these knobs. If you need a complete knob replacement, or want to just print your own in the color of your choice you can find my full knob model here https://makeronline.com/model/Blackstone%20Griddle%20Replacement%20Knob/17571.html That little piece in the middle is broken.   Use a screw driver or a tool of some sort to pop it out of the middle, chances are it's already in a couple pieces. Put the printed insert in place, note the orientation of the little tab which is used to hold it in place. The chamfered edge of the insert goes in first. Note, you might have to press on this with some force to get it to pop into place. When done, it will look similar to this (assuming you printed with orange Easy-ABS!) in whatever color/filament you chose. Also, the model is approx 3 millimeters taller than the hole it goes into. I did that incase I wanted to have some material to grab onto with pliers to pull it out. That means the knob sticks out about 3mm more than with the original insert. If you don't want it to stick out, using Bambu Studio, shorten the model from the top by 3mm (the top does not have a chamfer). If you shorten it by the chamfered end, it will not fit correctly.