Blackwargreymon Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA PolyLite Lemon Yellow Transmission Distance: 6.5PLA PolyLite White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions:Start with BlackAt layer #10 (0.88mm) swap to Lemon YellowAt layer #19 (1.6mm) swap to White for the rest.