Bleach Ichigo HueForge

This was my fist Hueforge not the best work and also the model is thin wait for it to cool down before taking off build plate. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160.95x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.2339mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Jade White At layer #15 (1.28mm) swap to Black At layer #16 (1.36mm) swap to Red Setting Layer height: 0.08Initial Layer height: 0.16Wall: 2Sparse infill density: 100%Sparse infill pattern: RectilinearTurn Off Prime Tower