Blimp / Zeppelin with Stand

A simple 3d printable model of a blimp / zeppelin.
Printed without supports on my Ender 3 with a 0.6mm nozzle.
Use a very small layer height for the rotor to allow the overhangs to print.

Can be scaled down quite a bit - but you should preview that the fins on the back are still printing in your slicer of choice.

I printed one version at 100% and one at 35%. Both came out fine.
The image shows the scaled down version.

Assembly is quite easy thanks to the pins.
Just put some glue on the flat ends of the back and front part, shove in the pins and press them together. The gondola can just be glued on and the rotor fits in the back and can either be left loose so it can turn, or be fixed in place with some glue.