Thingiverse
Blower Control Unit 2, Particle Photon
par albertk836
41
Téléchargements
21
Likes
0
Makes
An update to a previous project, https://www.thingiverse.com/thing:572282. Wanted to make the room controller less intrusive in the room. I updated some of the hardware and eliminated others. As shown, it all fits into the previous 2 X 4 electrical box and uses a standard modern cover plate.
Below the display is a small vent with a mount for a Dallas Temperature sensor which I epoxy in place. The CPU tray included in the download section, is setup for a Pro-Mini clone which presses into place. I also have created a tray for a SPARK CORE / Particle Photon. Under the CPU tray between the I2C .96" OLED two color display is also a .5" X .5" push button switch for selecting options on the OLED.
I had to create a "Switch Bridge" for the back of the display because the back of the display is not flat. Components mounted on the back side of the display are of different heights. This caused the display to stick if pressed on the right side. The bridge corrects this. Please note the thic
Below the display is a small vent with a mount for a Dallas Temperature sensor which I epoxy in place. The CPU tray included in the download section, is setup for a Pro-Mini clone which presses into place. I also have created a tray for a SPARK CORE / Particle Photon. Under the CPU tray between the I2C .96" OLED two color display is also a .5" X .5" push button switch for selecting options on the OLED.
I had to create a "Switch Bridge" for the back of the display because the back of the display is not flat. Components mounted on the back side of the display are of different heights. This caused the display to stick if pressed on the right side. The bridge corrects this. Please note the thic
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
