Blue Rose bookmark- Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 51x151mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #13 (1.12mm) swap to Cyan At layer #19 (1.6mm) swap to White for the rest. You can scale the x, y axis, but do not scale the z axis otherwise the color blend will be off. Do not simplify image.Feel free to change colors as you like and experiment with your own visions. Any likes, comments, or suggestions will help greatly. Happy printing!! ( If you enjoy the model, a Boost would be gre