Thingiverse

Gadgets

Bluetooth Speakers

by onlydave · Gadgets

131 Downloads

135 Likes

1 Makes

Go to Model

Designed to print on a E3D BigBox

width: 290mm
height: 206mm
depth: 191mm

Speaker hole spacing: 136mm diagonal

Took 40 hours to print at 50mm/s base speed 0.3mm layer height

Used about 500g of filament

Supports needed

Category

Gadgets

Source

Thingiverse

Published

25.03.2017

What you need to print this: Intermediate Medium confidence

Why?

supports needed · 0.30mm layers

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Layer height

0.3 mm

Est. print time

40 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Bluetooth Speakers need supports when printing?

Yes, Bluetooth Speakers will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Bluetooth Speakers?

According to the design notes, Bluetooth Speakers takes approximately 40 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Bluetooth Speakers available in?

Bluetooth Speakers is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Bluetooth Speakers free to download?

Yes, Bluetooth Speakers is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Bluetooth Speakers

Similar Models

Add to Collection