Thingiverse
Blum Hinge Plate Jig
von awildeone
18
Downloads
10
Likes
0
Makes
#Concealed Hinge Plate Jig
Jig to help space the hinges correctly for concealed cabinet hinges.
The spacing between holes is 32mm and the distance from the edge of the fence is 1 7/16". The hinges that I used had a guide with mixed units of measurement...
There is also a cut out down the middle of the plate to line up with the center of the hinge on the door. If you measure the same distance to the middle of the hinge and the middle of this jig, it should line up perfectly.
Jig to help space the hinges correctly for concealed cabinet hinges.
The spacing between holes is 32mm and the distance from the edge of the fence is 1 7/16". The hinges that I used had a guide with mixed units of measurement...
There is also a cut out down the middle of the plate to line up with the center of the hinge on the door. If you measure the same distance to the middle of the hinge and the middle of this jig, it should line up perfectly.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
