MakerWorld

Decor

Blunt Tray

by Mike Roplastics · Decor

206 Downloads

187 Likes

124 Makes

Easy to print and useful… for me… Takes a little while (almost 4 hours) but no supports and only 2 filament changes. Plus, I mean look what you get for just 4 short hours. Hopefully someone else can find some use for it too.

Category

Decor

Source

MakerWorld

Published

14.11.2025

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

4 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Blunt Tray need supports when printing?

No supports needed for Blunt Tray — it's designed to print clean off the bed.

How long does it take to print Blunt Tray?

According to the design notes, Blunt Tray takes approximately 4 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Blunt Tray available in?

Blunt Tray is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Blunt Tray free to download?

Yes, Blunt Tray is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Blunt Tray

Similar Models

Add to Collection