Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / Office / Blustream SW41 HDMI Switcher Wall / table bracket
Blustream SW41 HDMI Switcher Wall / table bracket – 3D printable model from MakerWorld MakerWorld
Office

Blustream SW41 HDMI Switcher Wall / table bracket

by Monte · Office
3 Downloads
2 Likes
1 Makes
Go to Model
Here's a wall or under table bracket for the Blustream SW41AV-V2 HDMI switcher.I made it one piece to make it super easy and reliable to install and it's easy to get a level on it to get it straight.Front and Rear labels are due to increased clearance on the rear for HDMI and the power ports. Prints great in PLA fine but I usually use PETG or better due to the potential tempertures behind displays. Only 26g and 1hr printing with no supports for a functional bracket that will last.No extra parts other than appropiate wall screws are required. Enjoy.
Category
Office
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Medium confidence
Why?
print-in-place design · no supports
Support-free Print-in-place Hardware needed
Supports 0/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA, PETG
Est. print time
1 h
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Does Blustream SW41 HDMI Switcher Wall / table bracket need supports when printing?
Nope — Blustream SW41 HDMI Switcher Wall / table bracket is print-in-place, so it comes off the bed ready to use. No supports, no assembly.
How long does it take to print Blustream SW41 HDMI Switcher Wall / table bracket?
According to the design notes, Blustream SW41 HDMI Switcher Wall / table bracket takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Blustream SW41 HDMI Switcher Wall / table bracket available in?
Blustream SW41 HDMI Switcher Wall / table bracket is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Blustream SW41 HDMI Switcher Wall / table bracket free to download?
Yes, Blustream SW41 HDMI Switcher Wall / table bracket is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

1 Suggestions
Threaded Ceiling or Wall Hooded Cable Gland V.1
Threaded Ceiling or Wall Hooded Cable Gland V.1
by The Roach House
↓ 42 ♥ 12
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection