BLV 3 Point bed levelling

These are the bed mounts for my 3-point levelling system/kinematics for the BLV. These have been designed to work with the bed I designed, which can be found here:
https://www.thingiverse.com/thing:3875857

[UPDATE} Sometime ago I upgraded my printer to 1204 ballscrews, I have now uploaded the parts necessary to use my 3-point kinematics system. Note, as my ballscrews were a little long, I have lowered the stepper mounting position and use some adjustable height feet to raise the frame high enough.

I have made a jig for easier placement of the aluminium extrusions that hold the rails. I have made this so on side with 1 z-screw, it is to be located 205mm from the front extrusion. Opposite side front extrusion for rail is to be placed 80mm from front extrusion (corner piece) and back rail extrusion is to be placed 230mm away from the front rail extrusion. Any questions, please feel to ask....I will try to provide answrs with diagrams but can't guarantee how quickly I will respond.

Add