BMW e91 Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x164.81mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA Sunlu Black Transmission Distance: 0.3 PLA Sunlu Grey Transmission Distance: 1 PLA Sunlu White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Grey At layer #17 (1.44mm) swap