Boise State Logo Hueforge

Boise State Buster Bronco hueforge. Project: Boise State Logo2Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Sunlu Basic Blue Transmission Distance: 4 PLA Sunlu Basic Orange Transmission Distance: 5 PLA Sunlu White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Blue At layer #12 (1.04mm) swap to Orange At layer #20 (1.68mm) swap to White for the rest.