Slicer Discord
Bolt EV 2017-19 - Cheap Backup Camera Replacement – 3D printable model from MakerWorld MakerWorld
Vehicles

Bolt EV 2017-19 - Cheap Backup Camera Replacement

33 Downloads
9 Likes
9 Makes
Go to Model
Cheap backup replacement for Chevrolet Bolt EV LT 2017-19 (Analog model)and it's working on the infotainment display (as the original camera). I got a foggy camera (lens not good anymore) and to find a replacement is expensive.So I made an connector “adapter” with a JST Waterproof connector.You can cut the original adapter if you want and solder directly to the originals wires.Use the 3 ground wires connected together, one is the chassis, one is the power ground and the other is the video shield. I bougth a 7$ backup camera on aliexpress (20.5mm diameter).The camera fit exactly in the original hole and with the exact same angle.Cut the green wire on the camera to remove the mirror effect. Leave the white wire as is. (This is to add guides lines on the signal, but they are added from the system by default) I've added a new profile for another model of camera Buy me a coffee Boost Me
Category
Vehicles
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

1 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection