Bolts and nuts for Modular Mounting System

###These are the printable M5 bolts and nut for Modular Mounting System.
25mm is for arm joints. 65mm for phone clamp.
###WARNING:
###The 25mm bolt might not be strong enough to keep the arms in place. Metal bolts are highly recommended.
###DO NOT print in vertical orientation.

###Printing tip:

- In order for the bolts to be strong enough to take pulling force, they cannot be printed vertically. Therefore the bolts are oriented horizontally, with the bottom teeth trimmed off, and with 30 degrees step shape (it is usually 45 if printed vertical).
- Add more wall line counts in slicer until it becomes solid.
- Turn on complete support interface.
- With such treatment the bolts are both strong and easy to print with support material even at 0.2mm layer height.
- Print bolts and nuts at low outer wall speed (15mm/s) to increase accuracy.
- If the tolerence for bolts and nuts doesn't workout for you, try change XY compensation setting in slicer to get a larger toler