Bomb-Bat - 06, multicolor pixel art nesting box

Virtual Boy - Virtual Boy Wario Land - Enemies - Bomb-Bat - 06, multicolor pixel art nesting box. Two-part nestable box (nesting tolerance of 0.45 mm, nesting height of 35 mm, nesting walls of 0.8 mm thickness), with a multi-colored pixel art pattern of a bat, repeated four times (inner and outer sides, with a solidification layer sandwiched between them, on each of the two nestable parts of the box). The two parts of the box are a grouping/assembly of several sub-objects. Under the slicer, before slicing, you can modify the colors/filament assignment of each sub-object. In total, there are four identical patterns, two of which are mirrored, and you can change the colors of the sub-parts individually. Under the slicer, if we look at the objects during preparation, we can possibly change the filament assignments of certain sub-objects, to obtain pixel art patterns of different colors. So, for example, having obtained a more sober box with only the pattern visible at the front, because the other patterns would be assigned with the same color as the body of the box. This model is intended to be printed with a 0.4 mm diameter nozzle, at 100% scale, with a layer height of 0.20 mm (or 0.10 mm, but then this will increase the printing time) for all layers of both parts of the box oriented with the larger side flat on the bed (no print supports required). Take the time to look one by one the first layers at the preview before printing. Unless you change the scale and layer height, if printed at 100% scale with a layer height of 0.20 mm, you get the first two layers with the pixel art pattern, a solid layer without the pixel art pattern, two layers with the pixel art pattern, and the remaining layers are the interlocking walls. Happy printing. Credits : Pixel art extracted from https://www.spriters-resource.com/virtual_boy/virtualboywarioland/asset/157425/ Filaments used: PLA Silk White, PLA Gray, PLA Black.