Bonanza Gear Down Indicator Bezel Plus

The gear-down indicator bezel in my neighbor's Bonanza was in bad shape, and he asked if I could print a replacement. I was more than thankful when I found the original model by CarbonF33. I added a small lip to the original model, but ended up not using it and printing the original model by CarbonF33. If you want a replacement with a lip, this one here may help. It is otherwise identical to the original.

My neighbor anticipated a lot of trouble in reassembling the indicator, so I made a small tool that will help attach the actuator wire to the indicator. When the indicator is positioned correctly with the wire attached, the lock nut can be tightened with the tool in place; the soft plastic won't interfere. I printed this in PLA. If you are gong to use this, print 3 or 4 at a time or really slow things down. You will get a better print at the top due to the longer layer time when printing multiple pieces per layer. My neighbor reported that the tool made it very easy to con