Bone Tomahawk Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 134.68x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA Bambu Bone White (Manual Transmission Distance: 3This print uses 3 unique filamentsSwap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Red At layer #14 (1.2mm) swap to Bone White (Manual for the rest.